I-Tungsten Carbide Composite Rods Noma I-YD Welding Rods Yamathuluzi Okugaya

I-Tungsten Carbide Composite Rods Noma I-YD Welding Rods Yamathuluzi Okubhola Isithombe Esifakiwe

Incazelo emfushane:

Iziqalo:60-70%Black Silicon Carbide Grits Kanye no-30-40%Ni/Cu

UbudeUsayizi: 280/350/450mm

Ububanzi:12/16/22mm

Ukuqina:87-90HRA

Isisindo:250-290g;450-480g

Black Silicon Carbide Grits Usayizi:1.6-3.2mm;3.2-4.8mm;4.8-6.4mm;6.4-8mm;8-9.5mm;9.5-12.7mm

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

Incazelo

I-tungsten carbide composite rods/YD welding rodsisetshenziselwa kakhulu ukumboza izinto ezisetshenziswayo ezigugile nezisikwayo kuwoyela, izimayini, izimayini zamalahle, indawo yokwakheka komhlaba, ezokwakha nezinye izimboni. Njenge:Reamers, Openers, Amathuluzi okudoba, Casing cutters, Amathuluzi okugaya, amathuluzi eCoring, Stabilizers,Screw ama-feeder, amaPaddles we-slurry,ukumbiwa kokwakha,ukuxuba isihlabathi esitholakalayo,Ukuvikela ukugqokwa kwe-abrasive okujwayelekile njll.

Eyethuizinti ezihlanganisiwe ze-carbideithatha isando esiphezulu se-scrap ukuze iphule izinhlayiya, ezingaqukethe ukungcola, futhi ukumelana nokusika nokugqoka kungcono kakhulu kunokwezinhlayiya eziphukile ezixubile, qinisekisa ukuzinza kokusebenza komkhiqizo.

Inqubo yokuhlola okukhethekile yezinhlayiya eziphukile iqinisekisa ukuthi izinhlayiya eziphukile ezidingekayo ziyi-engeli eminingi, hhayi flat.I-solder yekhwalithi ephezulu, inqubo yokuphonsa evuthiwe, izinhlayiya eziphukile ezifashini eziningi zezinduku eziyinhlanganisela, ukusebenza okungcono kokugeleza, nokuthuthukisa ukusebenza kahle kokukhiqizwa kwamakhasimende.

I-Tungsten-Carbide-Composite-rods-noma-YD-welding-rods-for-Drilling-tools-2

I-Scrap Top Hammer

I-Tungsten-Carbide-Composite-rods-noma-YD-welding-rods-for-Drilling-tools-1

Phula Izinhlayiya

I-Tungsten-Carbide-Composite-rods-noma-YD-welding-rods-for-Drilling-tools-4

I-Carbide Composite Rod

I-Tungsten-Carbide-Composite-rods-noma-YD-welding-rods-for-Drilling-tools-3

Milling Shoes

Amabanga amabili ayatholakala, kungaba yi-BBW yezicelo zokugqokwa noma i-BBC yokusika izicelo.Osayizi abafakwe ngezansi:

Usayizi wokusanhlamvu	1.6-3.2MM	1/16"- 1/8"BBW
	3.2-4.8MM	1/8"- 3/16"BBW
	4.8-6.4MM	3/16"- 1/4"BBC
	6.4-8.0MM	1/4"- 5/16"BBC
	8.0-9.5MM	5/16"- 3/8"BBC
	9.5-12.7MM	3/8"-1/2"BBC

Abanye osayizi abaceliwe.Okuqukethwe okujwayelekile kwe-Tungsten Carbide Grit = 65% Kuyatholakala futhi 50%, 60% & 70%, Ibhalansi: Matrix(CuZnSn)

Kukhethwe ngokukhethekileI-Tungsten Carbide Gritkungaba "i-blocky" enemiphetho ebukhali yokusika isicelo noma "eyindilinga" ye-Tungsten Carbide Grit yezinhlelo zokusebenza ezigqokwayo ikhiqizwa ngaphansi kwezilawuli zekhwalithi eziqinile.Impahla ihlanzwa kahle ukuze kuqinisekiswe izindawo zokumanzisa ezingcono kakhulu, kokubili ngesikhathi sokukhiqiza nokufaka.Izinqubo zokulawula ikhwalithi eziqinile ziqinisekisa ukuphindaphinda kwekhwalithi enhle kakhulu, induku eshisayo ephansi.I-Tungsten Carbide Grit ihlanganiswe ne-Copper, Nickel ne-Zinc alloy, ukuze kukhiqizwe i-Composite Rod yekhwalithi ephezulu.(Igama le-Matrix elithi AWS-RBCuZn-D).